Release Notes

Closed defects with code change in Fabric OS v7.2.0
Fabric OS v7.2.0a Release Notes v1.0 Page 66 of 93
Defect ID:
DEFECT000431920
Technical Severity:
High
Summary:
Support the documented BRCD-FCIP-Ext MIB in MIB reference.
Symptom:
User will always see 0 for the below measures
fcipExtendedLinkTcpDroppedPackets
fcipExtendedLinkTcpSmoothedRTT
fcipExtendedLinkRtxRtxTO
fcipExtendedLinkRtxDupAck
fcipExtendedLinkDupAck
Risk of Fix:
Low
Probability:
High
Feature:
Port Statistics
Function:
Other
Reported In Release:
FOS7.0.1
Defect ID:
DEFECT000432470
Technical Severity:
High
Summary:
Standby CP panics every time two port blades are moved into a new logical switch
Symptom:
On a switch with devices that neither cut light nor come on line, using lscfg to move ports around
logical switches, can lead to panic on Standby CP.
Risk of Fix:
Low
Probability:
Low
Feature:
16G Platform Services
Function:
FOS Kernel Drivers
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000432514
Technical Severity:
Medium
Summary:
After power cycle, FC8-64 port blade that is installed incorrectly in BR8510 faults during POST
Symptom:
FC8-64 port blade faults (51) during POST. A slotpoweroff/on or reboot clears the condition.
Risk of Fix:
Low
Feature:
Diagnostics
Function:
Post Diags
Reported In Release:
FOS7.0.1
Defect ID:
DEFECT000432563
Technical Severity:
Medium
Summary:
PortID pop up are in decimal instead of hex on WEBTools in FOSv7.x
Symptom:
PortID pop up are in decimal instead of hex on WEBTools in FOSv7.x
Risk of Fix:
Low
Feature:
FOS Software
Function:
Web Management
Reported In Release:
FOS7.0.2
Service Request ID:
1115490
Defect ID:
DEFECT000432654
Technical Severity:
High
Summary:
Setting strict mode with DCC policy from disabled switch can cause dual CP panic
Symptom:
Setting strict mode on the fabric after creating a DCC policy with any disabled switch in fabric, may
cause a verify error that results in a dual CP panic.
Workaround:
Found the misconfigured DCC policy, remove that particular DCC Policy and use the fabric.
Risk of Fix:
Low
Probability:
Medium
Feature:
FOS Security
Function:
ACL
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000432793
Technical Severity:
Medium
Summary:
Switchshow and Portshow outputs are not consistent for F-port trunks
Symptom:
After an F-port trunk is formed, the switchshow output shows the same port index as the master port
for the slave ports.whereas the portshow output shows the proper index.
Risk of Fix:
Medium
Probability:
Medium
Feature:
FOS Software
Function:
ASIC Driver
Reported In Release:
FOS6.4.2
Service Request ID:
1116273