Users Guide

Some HBAs and storage devices can be configured with dual initiator and target capability. Such
devices are displayed as both HBA and storage devices in the matrix.
Editing the zoning configuration
You can customize which HBAs can access which storage devices by clicking Edit
under Zoning in the
Tasks panel. This starts a wizard that creates a new Custom Zoning scheme based on your device
accessibility choices.
If you make any zoning changes to the default Typical Zoning configuration, you create a Custom
Zoning configuration to replace it. You can later restore the Typical Zoning configuration by clicking
Restore Default Typical Zoning in the Tasks panel.
1. Click Edit under Zoning in the Tasks panel.
A wizard launches, briefly displaying the Zone Access Map for Devices.
A Review Device Connections dialog box displays device connections over the Zone Access Map
for Devices. Make sure all connected devices are present and recognized by the switch.
2. Click Next.
The Define Device Aliases window is displayed.
3. Add or modify aliases in the New Alias column.
4. Click Next.
The Edit HBA/Storage Accessibility Matrix window is displayed.
Managing Your Switch
52 EZSwitchSetup Administrator’s Guide
53-1002940-01