Release Notes

Fabric OS v7.2.1e Release Notes v1.0 Page 7 of 82
Adaptive Networking with QoS
Adaptive Networking with QoSAdaptive Networking with QoS
Adaptive Networking with QoS—Adaptive Networking provides a rich framework of capability allowing a user to
ensure high priority connections obtain the bandwidth necessary for optimum performance, even in congested
environments. The QoS SID/DID Prioritization and Ingress Rate Limiting features are the first components of
this license option, and are fully available on all 8Gb and 16Gb platforms.
Note :
Note :Note :
Note :
With FOS v7.2, the Adaptive Networking license has become part of the base FOS firmware, and
features under this license no longer require the license to be installed. Customers that wish to have
these capabilities without purchasing the license are required to upgrade to FOS v7.2 or later.
Brocade 6520 does not require the Adaptive Networking with QoS license to enable the capabilities
associated with this license. These capabilities are included by default on the Brocade 6520.
Server Application Optimization
Server Application OptimizationServer Application Optimization
Server Application Optimization — When deployed with Brocade Server Adapters, this license optimizes overall
application performance for physical servers and virtual machines by extending virtual channels to the server
infrastructure. Application specific traffic flows can be configured, prioritized, and optimized throughout the
entire data center infrastructure. This license is not supported on the Brocade 8000.
Note :
Note :Note :
Note :
With FOS v7.2, Server Application Optimization license has become part of the base FOS firmware,
and features under this license no longer require the license to be installed. Customers that wish to
have these capabilities without purchasing the license are required to upgrade to FOS v7.2 or later.
Brocade 6520 does not require the SAO license to enable the capabilities associated with this license.
These capabilities are included by default on the Brocade 6520.
Integrated Routing
Integrated RoutingIntegrated Routing
Integrated Routing— This license allows any port in a DCX 8510-8, DCX 8510-4, Brocade 6510, Brocade 6520,
DCX-4S, DCX, 5300, 5100, 7800, or Brocade Encryption Switch to be configured as an Ex_port or VEx_port (on
some platforms) supporting Fibre Channel Routing. This eliminates the need to add an FR4-18i blade or use
the 7500 for FCR purposes, and also provides double or quadruple the bandwidth for each FCR connection
(when connected to another 8Gb or 16Gb-capable port). .
Encryption Performance Upgrade
Encryption Performance Upgrade Encryption Performance Upgrade
Encryption Performance Upgrade — This license provides additional encryption processing power. For the
Brocade Encryption Switch or a DCX/DCX-4S/DCX 8510-8/DCX 8510-4, the Encryption Performance License
can be installed to enable full encryption processing power on the BES or on all FS8-18 blades installed in a
DCX/DCX-4S/DCX 8510-8/DCX 8510-4 chassis.
DataFort Compatibility
DataFort CompatibilityDataFort Compatibility
DataFort Compatibility — This license is required on the Brocade Encryption Switch or DCX/DCX-4S/DCX 8510-
8/DCX 8510-4 with FS8-18 blade(s) to read and decrypt NetApp DataFort-encrypted disk and tape LUNs.
DataFort Compatibility License is also required on the Brocade Encryption Switch or DCX/DCX-4S/DCX 8510-
8/DCX 8510-4 Backbone with FS8-18 Encryption Blade(s) installed to write and encrypt the disk and tape
LUNs in NetApp DataFort Mode (Metadata and Encryption Algorithm) so that DataFort can read and decrypt
these LUNs. DataFort Mode tape encryption and compression is supported beginning with the FOS v6.2.0
release on DCX platforms. Availability of the DataFort Compatibility license is limited; contact your vendor for
details.
Advanced Extension
Advanced Extension Advanced Extension
Advanced Extension – This license enables two advanced extension features: FCIP Trunking and Adaptive Rate
Limiting. The FCIP Trunking feature allows multiple IP source and destination address pairs (defined as FCIP
Circuits) via multiple 1GbE or 10GbE interfaces to provide a high bandwidth FCIP tunnel and failover resiliency.
In addition, each FCIP circuit supports four QoS classes (Class-F, High, Medium and Low Priority), each as a
TCP connection. The Adaptive Rate Limiting feature provides a minimum bandwidth guarantee for each tunnel
with full utilization of the available network bandwidth without impacting throughput performance under high
traffic load. This license is available on the 7800 and the DCX/DCX-4S/DCX 8510-8/DCX 8510-4 for the FX8-
24 on an individual slot basis.