Users Guide

70 53-1002998-01
Fabric Watch Administrator’s Guide
Resource class settings
8
Environment class default settings
Table 24 provides default Environment class settings for the Temperature area. Check the
appropriate hardware reference manual for differences in actual environmental requirements. The
temperature sensors monitor the switch temperature in Celsius.
NOTE
Fabric Watch no longer supports fan monitoring. Event Manager (EM) now manages fan monitoring
and the switch status is calculated based on the fan status reported by EM.
Resource class settings
The Resource class monitors flash memory. It calculates the amount of flash space consumed and
compares it to a defined threshold.
Resource class area
Table 25 describes the Fabric Watch Resource class area. Configure the Resource class using the
sysMonitor command.
TABLE 24 Environment class default settings for temperature
Default threshold settings
Unit: Degrees Centigrade
Switch Low High Buffer Default alarm settings Threshold state
Below: 3
Above: 3
(Same setting for all
devices)
Out-of-range
Out-of-range
(Same setting for all devices
except Brocade DCX-4S)
Brocade 300 0 50 10
Brocade 5100 0 63 10
Brocade 5300 0 48 10
Brocade 6505 0 58 10
Brocade 6510 0 65 10
Brocade 6520 0 61 10
Brocade 7800 0 58 10
Brocade Encryption Switch 0 63 10
Brocade VA-40FC 0 63 10
Brocade DCX 0 70 10
Brocade DCX-4S 0 75 10 Informative
Out-of-range