Users Guide

74 53-1002998-01
Fabric Watch Administrator’s Guide
Recommended environment and resource monitoring settings
8
Displaying the current CPU usage threshold
Enter the sysMonitor command using the following parameters:
switch:admin> sysmonitor --show cpu
CPU Usage : 2%
CPU Usage Limit : 75%
Number of Retries :3
Polling Interval : 120 seconds
Actions: snmp
Displaying the current memory usage threshold
Enter the sysMonitor command using the following parameters:
switch:admin> sysmonitor --show mem
Used Memory: 171476k 34%
Total Memory: 504344k
Free Memory: 332868k
Used Memory Limit: 60%
Low Used Memory Limit: 40%
High Used Memory Limit: 70%
Polling Interval: 10 seconds
No Of Retries: 1
Actions: snmp,raslog
Configuring the system memory usage monitoring threshold
Enter the sysMonitor command using the following parameters:
switch:admin> sysmonitor --config mem -poll 10 -retry 1 -limit 20 -action snmp,
raslog -high_limit 80
Recommended environment and resource monitoring settings
Table 27 lists the recommended settings for Environment and Resource classes.
TABLE 27 Recommended Environment and Resource class settings
E=Error_Log, S=SNMP_Trap,
P=Port_LOG_LOCK,
M=EMAIL_ALERT, PF=Port Fence
Trait Configuration
Class
Area
Default
Custom
Unit
Time Base
Low Thresh
High Thresh
Buffer
Default
Custom
Below Above
Notes
Environment Temperature X C None 0 Depends
on switch
type
10 X E,S E,S
Resource Flash X Percentage None 0 90 0 X E,S E,S