Deployment Guide

4. Double-click a recipient IP address in the SNMPv3 section and enter a new IP address.
5. Select a trap level from the Trap Level menu.
6. Optional: Select the Enable SNMPv3 Informs for all Trap Recipients check box to enable or
disable inform requests for all trap recipients.
7. Enabling SNMPv3 informs allows you to enter the Engine ID.
The Engine ID is required to authenticate the inform request. If informs request is disabled, the
SNMP manager does not send a response to the sender.
8. Click Apply.
Changing the access control configuration
NOTE
The port number is not included.
To change the access control configuration, perform the following steps.
1. Open the Switch Administration window as described in Opening the Switch Administration window
on page 52.
2. Select the SNMP tab.
3. Double-click an access host IP address in the Access Control List section and enter a new host IP
address. You can enter an IP address in either IPv4 or IPv6 format. When you use the IPv6 format,
you must include a prefix; for example, fec0::2002/64.
NOTE
The list is scrollable. If you do not see your user name, scroll down using the scroll bar or by clicking
the Access Host heading.
4. Select a permission for the host from the Access Control List menu.
Options are Read Only and Read Write.
5. Click Apply.
RADIUS management
Fabric OS supports RADIUS authentication, authorization, and accounting service (AAA). When
configured for RADIUS, the switch becomes a Network Access Server (NAS) that acts as a RADIUS
client. In this configuration, authentication records are stored in the RADIUS host server database.
Login and logout account name, assigned role, and time accounting records are also stored on the
RADIUS server.
You should set up RADIUS through a secure connection such as SSH.
The following are the three choices in the drop-down menu when RADIUS is selected as the primary
service:
Changing the access control configuration
Web Tools Administrator's Guide 217
53-1003169-01