Deployment Guide

1098 Fabric OS Command Reference
53-1003131-01
supportShowCfgDisable
2
supportShowCfgDisable
Disables a group of commands under the supportShow command.
SYNOPSIS supportshowcfgdisable os | exception | port | fabric
| services | security | network | portlog | system | extend
| filter | perfmon | ficon | iswitch | asic_db | ag
| dce_hsl | crypto | fcip
DESCRIPTION Use this command to disable a group of commands under the supportShow command. Use the
supportShowCfgEnable command to enable groups of commands.
The FCIP commands are supported only on the Brocade 7800/FX8-24 platforms and cannot be
configured to collect data on unsupported platforms.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
os
Disables the OS group commands.
exception
Disables the exception group commands.
port
Disables the port group commands.
fabric
Disables the fabric group commands.
services
Disables the service group commands.
security
Disables the security group commands.
network
Disables the network group commands.
portlog
Disables the portlog group commands.
system
Disables the system group commands.
extend
Disables the extend group commands.
filter
Disables the filter group commands.
perfmon
Disables the Performance Monitor group commands
ficon
Disables the FICON group commands.
iswitch
Disables the FC Router group commands.