Deployment Guide

Fabric OS Command Reference xxv
53-1003131-01
• portCfgFec - Included -FEC and -TTS options.
• portCfgQoS - Updated to include the support for port range.
• portCfgShow - Included FLOGI logout and SIM port information.
• portCfgSpeed - Included -m option.
• portCmd - Included --pmtu and --wtool options.
• portDPortTest - Updated estimated cable distance information.
• portErrShow - Included --help option.
• portLedTest - Updated the action type information.
• portLoopbackTest - Updated to indicate that maximum number of frames supported is 1000.
Removed spd_mode1 option.
• portPerfShow - Included the support for index numbers.
• portShow - Included --ipsec policy, -link, -force, and -pid options.
• portTest - Changed -timeout to make clear that the iteration has be set to 0 for effective
timeout and a note to indicate that F_Ports will be skipped in spinFab if VF is enabled.
• powerOffListSet - Included a note to indicate that Core blades are not included in
powerofflistset.
• relayConfig - Included --delete option.
• secCertUtil - Included a note to indicate that certificate name is optional with seccertutil delete
-ldapcacert.
• sfpShow - Included the identifier list. Included -link, -force, and, -pid options.
• slotPowerOff - Included support for core blades, and -force and --help options.
• slotPowerOn - Included support for core blades, and --help options.
• slotShow - Included FC-16-64 to the list of Blade IDs.
• snmpConfig - Included support for AES256.
• spinFab - Included a note to indicate that F_Ports will be skipped in spinFab if VF is enabled.
• supportFtp - Included a note to indicate that ftp and anonymous are both reserved usernames
and do not prompt for password.
• switchBeacon - Included that portpeerbeacon is exclusive of this command.
• switchEnable - Included a note to indicate that the ports of a disabled blade can even be
enabled in that particular switch.
• switchShow - Included FLOGI logout, Defzone conflict, HIF mode, and D_Port violation.
• sysMonitor - Changed the low_limit and high_limit values.
• trunkShow - Included -swname option.
Deprecated commands
There are no commands deprecated in Fabric OS v7.3.0.