Deployment Guide

326 Fabric OS Command Reference

53-1003131-01

fcpLogShow

Displays the FCPD debug information log.

SYNOPSIS fcplogshow

DESCRIPTION Use this command to display the debug information logged at various stages during the Fibre Channel

Protocol daemon (FCPD) device probing.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

OPERANDS None

EXAMPLES To display the FCPD debug information log:

switch:admin> fcplogshow

Switch 0; Sat Dec 18 14:22:05 2010

14:22:05.799269 Flush or Probe rcvd, port 15, \

Line: 16777862, scn_type: 2

14:22:05.799279 Probe flush, port:15, \

Line:16780554, flag:0

14:22:17.469561 Flush or Probe rcvd, port 15, \

Line: 16777862, scn_type: 1

14:22:17.469567 Probe Msg Rcvd, port: 15, Line: 16777899, \

prev_state: 0, msg_scn_arg1: 0

14:22:17.470618 fcpStartProbe, port: 15, line: 16778347, \

async_state: 1, origin: 0,probe_state: 0, opt_code: 0

14:22:17.471052 fcpStartProbe, port: 15, line: 16778413, \

async_state: 1073741824, origin: 0,probe_state: 0, opt_code: 0

14:22:17.471057 Probe flush, port:15, Line:16780554, flag:1

(output truncated)

SEE ALSO fcpLogClear, fcpLogDisable, fcpLogEnable