Users Guide

370 Fabric OS Command Reference
53-1002921-02
ficonCupShow
2
MIHPTO
Displays the FICON-CUP missing interrupt handler primary timeout (MIHPTO)
value in seconds.
DD_LOG
Displays the latest Director Diagnostics Log.
diag_info
Displays dignostic information for the logical switch such as whether Diagnostic
Interval has been set for CUP Diagnostics (if so, then Statistics Sampling is
running), along with additional information about Statistics Sampling by the CUP,
the detected CUP Diagnostic capabilities and settings for other switches in the
fabric..
hlthchk_log
Displays the HealthCheck Logs for the logical switch. It displays Sense Data
returned to the FICON host for Asynchronous Error Reporting events generated
by the CUP for Congestion, Latency, or Port Fencing events which have been
detected by the switch.
LP
Displays the logical paths on the switch. For each entry, the command displays
the port identifier (PID), the LPAR identifier (CHID), reporting state (operational or
reset (=nonoperational)), and reporting path state (current, primary, or alternate).
EXAMPLES To display the FMS mode for the switch:
switch:user> ficoncupshow fmsmode
fmsmode for the switch: Enabled
To display the mode register for the switch:
switch:user> ficoncupshow modereg
POSC UAM ASM DCAM ACP HCP
------------------------------
1 0 1 1 1 0
To display the ASM bit in the mode register for the switch:
switch:user> ficoncupshow modereg ASM
ASM
---
1
To display the MIHPTO value for the CUP:
switch:user> ficoncupshow MIHPTO
MIHPTO for the CUP: 60 seconds
To display the logical paths for the switch:
switch:user> ficoncupshow LP
FICON CUP Logical Paths for CUP 0x08FE00
LP Operational Reporting
PID CHID State Path State
------ ---- ---- ------
082300 1A Oper*** Current
082300 1B Oper