Deployment Guide

comparison 20
mapping 25
requirements 85
types 20
portcfgpersistentenable command 43
port group
add N_Port 54
createport group
add N_Port 56
delete N_Port 54
disabling 55
enabling logging balancing mode 56
login balancing mode 55
managed fabric name monitoring mode 55
remove port group 54
rename 55
port grouping policy
considerations 57
downgrading considerations 58
Port Grouping policy
using portcfgnport command 43
port mapping
adding F_Ports to N_Ports 31
adding ports 31
adding secondary N_Port 65
considerations for initiator and target ports 31
deleting secondary N_Port 65
maximum number of F_Ports 42
removing F_Ports from N_Ports 32
Port mirroring, not supported 74
port state, description 24
port swap, not swapping TA 74
port types, limitations 74
preferred secondary N_Port
login balancing mode 65
online 62
PWWN
duplicate handling during login 80
format 74
sharing TA trunk group 74
Q
QoS
firmware downgrade 79
ingress rate limiting 78
SID/DID traffic prioritization 78
R
removing devices from switch 50
removing trunk ports 74
requirements, ports 85
S
settings
FLOGI 90
inband queries 90
management server platform 90
zone, no access 91
static vs. dynamic mapping 36
supported hardware and software 9
switch mode, verify 90
T
terms 10
trunk area
assign 72
configuration management 72
disabling 74
remove ports 72
standby CP 74
using the porttrunkarea command 74
trunk groups, create 72
trunking
configuring on edge switch 71
considerations in AG module 77
considerations on edge switch 74
disabling 74
enabling 73, 74
license 71
trunk master, limitation 74
U
unlock N_Port 43
upgrading 74
V
VMware configuration for device mapping 40
Z
zoning
98 Access Gateway Administrator's Guide
53-1003126-01