Users Guide

150 Fabric OS Message Reference
53-1002929-01
AUTH-1004
5
AUTH-1004
Message Failed to set <data type> type to <setting value>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the authUtil command has failed to set the authentication configuration value. The data
type can be authentication type, DH group type, hash type, or policy type.
Recommended
Action
Execute the authUtil command again.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
AUTH-1005
Message Authentication file does not exist: <error code>.
Message Type LOG
Severity ERROR
Probable Cause Indicates an authentication file corruption.
Recommended
Action
Execute the firmwareDownload command to reinstall the firmware.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
AUTH-1006
Message Failed to open authentication configuration file.
Message Type LOG
Severity WARNING
Probable Cause Indicates an internal problem with the Secure Fabric OS.
Recommended
Action
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and
switchEnable commands.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.