Users Guide

Fabric OS Message Reference 13

53-1002929-01

Commands for displaying and configuring the system message logs

IF-MIB: YES

BD-MIB: YES

SW-TRAP: YES

swFault: YES

swSensorScn: YES

swFCPortScn: YES

swEventTrap: YES

DesiredSeverity:Informational

swFabricWatchTrap: YES

DesiredSeverity:Critical

swTrackChangesTrap: YES

swIPv6ChangeTrap: YES

swPmgrEventTrap: YES

swFabricReconfigTrap: YES

[...]

Commands for displaying and configuring the system message logs

Table 3 describes commands that you can use to view or configure the system message logs. Most

commands require the admin access level. For detailed information on required access levels and

commands, refer to the Fabric OS Command Reference.

TABLE 3 Commands for viewing or configuring the system parameters and message logs

Command Description

auditCfg Configures the audit message log.

auditDump Displays or clears the audit log.

errClear Clears all error log messages for all switch instances on this control processor (CP).

errDelimiterSet Sets the error log start and end delimiter for messages pushed to the console.

errDump Displays the entire error log, without page breaks. Use the -r option to show the

messages in reverse order, from newest to oldest.

errFilterSet Sets an error severity filter for the system console.

errModuleShow Displays all the defined error log modules.

errShow Displays the entire error log, with page breaks. Use the -r option to show the messages

in reverse order, from newest to oldest.

pdShow Displays the contents of the panic dump and core dump files.

portErrShow Displays the port error summary.

portLogClear Clears the port log. If the port log is disabled, this command enables it.

portLogDisable Disables the port log facility.

portLogDump Displays the port log, without page breaks.

portLogDumpPort Displays the port log of the specified port, without page breaks.

portLogEnable Enables the port log facility.

portLogEventShow Displays which port log events are currently being reported.

portLoginShow Displays port logins.

portLogPdisc Sets or clears the debug pdisc_flag.

portLogReset Enables the port log facility.