Command Reference Guide

Fabric OS Command Reference 297
53-1002746-01
fcoe
2
--enable
Enables the specified FCoE port.
--loginshow
Displays information about the devices logged in to the specified FCoE port.
--fcmapset
Configures the FCMAP values for Fabric Provided MAC Addresses (FPMA) for
the specified VLANs.
-vlan vid
Specifies the VLAN for which to set the FCMAP.
fcmapid
Specifies the FCMAP to be set.
--fcmapunset
Unsets the FCMAP for a specified VLAN. Devices previously logged in are
disconnected.
-vlan vid
Specifies the VLAN ID for which the FCMAP is unset.
--fipcfg
Configures FIP multicast advertisement intervals.
-advintvl intvl
Specifies the interval in seconds. The minimum interval value is 0 and the
maximum value is 90. A value of 0 cancels the previous advertisement interval
value. A value of 1 to 90 is valid for changing the interval.
--fipcfgshow
Displays FIP configurations.
--resetlogin
Clears the logins that occurred through a front end port or from a device specified
by the Enode's VN_Port WWN.
-teport [slot/]port
Specifies the slot or port number.
-device wwn
Specifies the device WWN.
EXAMPLES To display the FCoE ports on the Brocade 8000:
switch:admin> switchshow
switchName: elara133
switchType: 76.6
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 133
switchId: fffc85
switchWwn: 10:00:00:05:1e:76:60:80
zoning: ON (cfg_fcoe)
switchBeacon: OFF
FC Router: OFF
FC Router BB Fabric ID: 1
Index Port Address Media Speed State Proto
==============================================
0 0 850000 id N8 Online FC E-Port
10:00:00:05:1e:92:de:00 "pluto145" (upstream)(Trunk master)
1 1 850100 id N8 Online FC E-Port