Command Reference Guide

Fabric OS Command Reference 317
53-1002746-01
fcpProbeShow
2
fcpProbeShow
Displays the Fibre Channel Protocol (FCP) probe information.
SYNOPSIS fcpprobeshow [slot/]port
DESCRIPTION Use this command to display the Fibre Channel Protocol daemon (FCPD) device probing information for
the devices attached to the specified F_Port or FL_Port. This information includes the number of
successful logins and SCSI INQUIRY commands sent over this port and a list of the attached devices.
For switches running Fabric OS v7.0.0 or later, this command includes probing information for NPIV
devices. In addition, this command displays the list of devices connected to a port and the number of
successful PLOGI, PRLI, INQUIRies, and current probe state.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
slot
For bladed systems only, specify the slot number of the port to display, followed by
a slash (/).
port
Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports. This operand is required.
EXAMPLES To display the FCP probe information:
switch:admin> fcpprobeshow 31
port 0 is FV-Port and it is online.
nodes probed: 3
successful PLOGIs: 3
successful PRLIs: 3
successful INQUIRies:3
successful LOGOs: 3
outstanding IUs: 0
probing state: 3
probing TOV: 0
probing count: 0
probing next: 0
pmap: 0x00000000, 0x00000000, 0x00000000, 0x00000000
update map: 0x40000000, 0x00000000, 0x00000000, 0x00000000
npiv pmap: 0x00000000 0x00000000 0x00000000 0x00000000 \
0x00000000 0x00000000 0x00000000 0x00000000
npiv update map: 0x00000006 0x00000000 0x00000000 0x00000000 \
0x00000000 0x00000000 0x00000000 0x00000000
list of devices(may include old NPIV devices):
0x500e8: SEAGATE ST318452FC 0005
0x500e4: SEAGATE ST318452FC 0001
0x500e2: SEAGATE ST318452FC 0005
SEE ALSO portLoginShow, portLogShow