Command Reference Guide

Fabric OS Command Reference 657

53-1002746-01

portCfgAutoDisable

Port will not be automatically disabled.

Port Auto Disable: ON

MODE : RESUME

Configured Option(s):No events configured.

Port will not be automatically disabled.

To enable the port autodisable feature for a range of ports, some of which were previously enabled (the

configuration is applied only to those ports, for which an update is necessary, that is, port 3 in the

following example):

switch:admin> portcfgautodisable --enable 0-3

Same configuration for port 0

Same configuration for port 1

Same configuration for port 2

To suspend the port autodisable configurations:

switch:admin> portcfgautodisable --suspend

Suspending Port Auto Disable will de-activate the triggers \

for all ports configured with Port autodisable conditions on this Logical

Switch.

Would you like to continue [y/n]?: y

PAD option is set to 'SUSPEND'

switch:admin> portcfgautodisable --show 18

Port Auto Disable: ON

MODE : SUSPEND

Configured Option(s): LOSG OLS NOS LIP

To resume the suspended port autodisable configurations:

switch:admin> portcfgautodisable --resume

PAD option is set to 'RESUME'

switch:admin> portcfgautodisable --show 18

Port Auto Disable: ON

MODE : RESUME

Configured Option(s): LOSG OLS NOS LIP