Deployment Guide

Fabric OS Message Reference 207
53-1003140-01
C2-1013
5
C2-1013
Message S<slot number>,P<port number>(<blade port number>): Duplicate rte_tbl_select
detected.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the selected table is corrupted.
Recommended
Action
This message must have a matching message for the other duplicate table. Reset both the specified
ports. If it is a trunk, reset the entire trunk.
C2-1014
Message Link Reset on Port S<slot number>,P<port number>(<blade port number>) vc_no=<vc
number> crd(s)lost=<Credit(s) lost> <Source of link reset > trigger.
Message Type LOG
Severity WARNING
Probable Cause Indicates that one or more credits are lost and the link is reset.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.
C2-1015
Message Port re-initialized due to Link Reset failure on internal Port S<slot
number>,P<port number>(<blade port number>).
Message Type LOG
Severity WARNING
Probable Cause Indicates that the specified port is re-initialized due to link reset failure.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.