Deployment Guide

Fabric OS Message Reference 541
53-1003140-01
FW-1339
5
FW-1339
Message <Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of Device Connection Control (DCC) violations has changed from a value
outside of the acceptable range to a value within the acceptable range. DCC violations indicate that an
unauthorized device tried to join the fabric. The DCC_POLICY allows for the specification of rules for
binding device ports (typically HBA ports) to specific switch ports. DCC policies ensure that whenever a
device performs a fabric login (FLOGI) request, the World Wide Name (WWN) specified in the FLOGI is
validated to be connected to the authorized port. Enforcement for private loop devices not performing
FLOGI is done through the name server.
Recommended
Action
No action is required.
FW-1340
Message <Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of login violations has changed. Login violations indicate that a login failure has
been detected.
Recommended
Action
Execute the errShow command to determine the IP location of the login attempt. Responses to
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
FW-1341
Message <Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of login violations has fallen below the low boundary. Login violations indicate
that a login failure has been detected.
Recommended
Action
No action is required.