Deployment Guide

Fabric OS Message Reference 683
53-1003140-01
NBFS-1001
5
NBFS Messages
NBFS-1001
Message Duplicate E_Port SCN from port <portnumber> in state <state change name> (<state
change number>).
Message Type LOG
Severity INFO
Probable Cause Indicates a duplicate E_Port state change notification (SCN) was reported. The neighbor finite state
machine (NBFSM) states are as follows:
• 0 - Down
• 1 - Init
• 2 - Database Exchange
• 3 - Database Acknowledge Wait
• 4 - Database Wait
• 5 - Full
Recommended
Action
No action is required.
NBFS-1002
Message Wrong input: <state name> to neighbor FSM, state <current state name>, port
<portnumber>.
Message Type FFDC | LOG
Severity ERROR
Probable Cause Indicates the wrong input was sent to the neighbor finite state machine (NBFSM). NBFSM states are as
follows:
• 0 - Down
• 1 - Init
• 2 - Database Exchange
• 3 - Database Acknowledge Wait
• 4 - Database Wait
• 5 - Full
If this error occurs repeatedly, then there is a problem in the protocol implementation between two
switches.
Recommended
Action
Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is
Full, then this message can safely be ignored. Otherwise, run the portDisable and portEnable
commands to refresh the port.