Deployment Guide

760 Fabric OS Message Reference
53-1003140-01
SEC-1044
5
SEC-1044
Message Duplicate member <member ID> in (<List>).
Message Type LOG
Severity ERROR
Probable Cause Indicates the specified member is a duplicate in the input list. The list can be a policy list or a switch
member list.
Recommended
Action
Do not specify any duplicates.
SEC-1045
Message Too many port members.
Message Type LOG
Severity ERROR
Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds the error in the security database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in
the ready state. If a switch is in the error state, the database may not be correctly updated for that
specific switch.
SEC-1046
Message Empty list.
Message Type LOG
Severity ERROR
Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds the error in the security database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in
the ready state. If a switch is in the error state, the database may not be correctly updated for that
specific switch.