Hardware Reference Manual

Brocade M6505 16 Gbps Fibre Channel SAN I/O Module Hardware Reference Manual 47

53-1002576-02

Supported HBAs

For information regarding supported Fibre Channel mezzanine adapters, refer to Dell-specific

product information.

For additional information, refer to your Dell PowerEdge documentation.

Fibre Channel standards compliance

The SAN I/O Module meets or exceeds the Fibre Channel standards for compliance, performance,

and feature capabilities as defined in the Brocade standards compliance list. This information is

available at:

http://www.brocade.com/products/interop/standards_compliance.jsp

Regulatory compliance

This section describes the regulatory compliance requirements for the Product Name.

FCC warning (US only)

This equipment has been tested and complies with the limits for a Class A computing device

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy, and if not installed and

used in accordance with the instruction manual, might cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case the user will be required to correct the interference at the user’s own

expense.

Port types Fabric OS Native mode

• E_Port (expansion port)

• F_Port (fabric-enabled port)

• U_Port (self-discovery based on switch type)

AG mode

• F_Port (fabric-enabled port)

• N_Port (NPIV-enabled port)

Fabric services

(Native Fabric mode only)

Simple Name Server, Registered State Change Notification (RSCN)

TABLE 12 Architectural specifications (Continued)

Feature Description