Messages Reference Guide

Fabric OS Message Reference 421
53-1002749-01
FICU-1010
5
FICU-1010
Message FMS mode enable failed due to port(s) with areas 0xFE or 0xFF is(are) connected to
device(s).
Message Type LOG
Severity WARNING
Probable Cause Indicates that the FICON Management Server (FMS) mode was not enabled because ports with areas
0xFE or 0xFF are connected to devices.
Recommended
Action
Disable ports with areas 0xFE or 0xFF using the portDisable command.
FICU-1011
Message FMS mode has been enabled.
Message Type AUDIT | LOG
Class CFG
Severity INFO
Probable Cause Indicates that the FICON Management Server mode (fmsMode) has been enabled.
Recommended
Action
No action is required.
FICU-1012
Message FMS mode has been disabled.
Message Type AUDIT | LOG
Class CFG
Severity INFO
Probable Cause Indicates that the FICON Management Server mode (fmsMode) has been disabled.
Recommended
Action
No action is required.