Messages Reference Guide

826 Fabric OS Message Reference
53-1002749-01
SULB-1004
5
Recommended
Action
No action is required. Run the firmwareDownloadStatus command for more information.
SULB-1004
Message Firmwarecommit has completed.
Message Type AUDIT | LOG
Class FIRMWARE
Severity INFO
Probable Cause Indicates that the firmwareCommit command has completed successfully.
Recommended
Action
No action is required. Run the firmwareDownloadStatus command for more information.
SULB-1005
Message Current Active CP is preparing to failover.
Message Type LOG
Severity INFO
Probable Cause Indicates that the active control processor (CP) is about to reboot. The standby CP is taking over as the
active CP.
Recommended
Action
No action is required. The firmwareDownload command is progressing as expected.
Run the firmwareDownloadStatus command for more information.
SULB-1006
Message Forced failover succeeded. New Active CP is running new firmware.
Message Type LOG
Severity INFO
Probable Cause Indicates that the previous standby control processor (CP) has now become the active CP and is running
the new firmware version.
Recommended
Action
No action is required. The firmwareDownload command is progressing as expected.
Run the firmwareDownloadStatus command for more information.