MIB Reference Guide

Fabric OS MIB Reference 87
53-1002750-01
FCFABRIC-ELEMENT-MIB (experimental branch)
4
FCFABRIC-ELEMENT-MIB (experimental branch)
NOTE
The FCFABRIC-ELEMENT-MIB is supported only in Fabric OS v2.6.x and v3.0.x.
This section contains descriptions and other information that is specific to FCFABRIC-ELEMENT-MIB
(in the experimental branch), including the following:
•FCFABRIC-ELEMENT-MIB organization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
•Definitions for FCFABRIC-ELEMENT-MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
•fcFeConfig group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
•fcFeOp group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
•fcFeError group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
•fcFeAcct group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
•fcFeCap group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
NOTE
Brocade does not support the settable “Write” function for any of the Fibre Channel FE MIB objects
except “fcFxPortPhysAdminStatus”.
The descriptions of each of the MIB variables in this chapter come directly from the
FCFABRIC-ELEMENT-MIB itself. The notes that follow the descriptions typically pertain to
Brocade-specific information and are provided by Brocade.
The object types in FCFABRIC-ELEMENT-MIB are organized into the following groups:
• Configuration
• Operational
• Error
• Accounting (not supported)
fcFxPortCapIntermix
1.3.6.1.2.1.75.1.5.1.1.8
Read only A flag indicating whether the Fx_Port is capable of supporting the
intermixing of Class 2 and Class 3 frames during a Class 1
connection. This flag is only valid if the port is capable of
supporting Class 1 service.
fcFxPortCapStackedConnMode
1.3.6.1.2.1.75.1.5.1.1.9
Read only A value indicating the mode of Stacked Connect request that the
Fx_Port is capable of supporting.
fcFxPortCapClass2SeqDeliv
1.3.6.1.2.1.75.1.5.1.1.10
Read only A flag indicating whether the Fx_Port is capable of supporting
Class 2 Sequential Delivery.
fcFxPortCapClass3SeqDeliv
1.3.6.1.2.1.75.1.5.1.1.11
Read only A flag indicating whether the Fx_Port is capable of supporting
Class 3 Sequential Delivery.
fcFxPortCapHoldTimeMax
1.3.6.1.2.1.75.1.5.1.1.12
Read only The maximum holding time (in microseconds) that the Fx_Port is
capable of supporting.
fcFxPortCapHoldTimeMin
1.3.6.1.2.1.75.1.5.1.1.13
Read only The minimum holding time (in microseconds) that the Fx_Port is
capable of supporting.
TABLE 31
Object and OID Access Description