Quick Start Manual

Brocade M6505 16 Gbps Fibre Channel SAN I/O Module QuickStart Guide 1

53-1002577-01

Brocade M6505 16 Gbps Fibre Channel SAN I/O Module

QuickStart Guide

Complete the steps in this QuickStart Guide to install and set up your Brocade M6505 16 Gbps

Fibre Channel SAN I/O Module in the Dell M1000e Blade Server Enclosure.

Prepare the M1000e Blade Server Enclosure for the switch

Before the Brocade M6505 16 Gbps Fibre Channel SAN I/O Module can be inserted in the Dell

M1000e Blade Server Enclosure, make sure the following conditions are met:

• The Dell M1000e Blade Server Enclosure is powered up.

• The I/O module bay into which the Brocade M6505 16 Gbps Fibre Channel SAN I/O Module

will be inserted is ready to receive the SAN I/O Module.

• All power requirements specific to the Dell M1000e Blade Server Enclosure are met.

• Any protective cover on the SAN I/O Module backside connector is removed.

Insert the SAN I/O Module in the Blade Server Enclosure

Complete the following steps to insert the Brocade M6505 16 Gbps Fibre Channel SAN I/O Module

in the Dell M1000e Blade Server Enclosure.

B1 C1 B2C2