Users Guide

1. Check the displayed addresses carefully to be sure they are correct, then click Next.
The Continue Configuration? window is displayed (
FIGURE 11 on page 20).
2. Select one of the following continuation options:
• Continue setting up your target switch with EZManager
Select this option if you intend to use EZSwitchSetup Switch Manager as your primary
management program for this switch.
• Discover another switch on the same subnet for IP assignment only
Select this option to discover another switch and set the IP address.
If you select this option, EZSwitchSetup Switch Manager will not be the default management tool
for this current target switch. To set up EZSwitchSetup Switch Manager as the management tool
for this switch, you must discover it again with EZSwitchSetup and select the first continuation
option.
• Exit EZSwitchSetup
Select this option if you want to use EZSwitchSetup as an IP configuration tool, but do not want to
use EZSwitchSetup Switch Manager as a management tool for the switch.
FIGURE 11 Continue Configuration?
Setting Up Your Switch
20 EZSwitchSetup Administrator’s Guide
53-1002940-01