User Manual
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Connecting the stand
- Using the tilt, swivel, and vertical extension
- Rotating the Display (C2422HE/C2722DE only)
- Configuring the display settings on your computer after rotation (C2422HE/C2722DE only)
- Operating the monitor webcam
- Connecting your monitor
- Dell Power Button Sync (DPBS)
- Organizing your cables
- Securing your monitor using Kensington lock (optional)
- Removing the monitor stand
- Wall mounting (Optional)
- Operating the monitor
- Troubleshooting
- Appendix
86 | Operating the monitor
If the webcam is pop in (retracted) and you press the Mute button, the following
message will appear:
Please pop up webcam + mic module
to enable your mic
When the USB upstream cable is not connected, and you press the Teams/
Hookswitch/ Mute button, the following message will appear:
This function is inactive.
To enable it,
you need to connect USB upstream to the monitor.
NOTE: For the Teams/ Hookswitch/ Volume down/ Volume up/ Mute
buttons to work, you need to connect the USB upstream cable (Type-A to
Type-B or Type-C to Type-C) from the PC to the monitor.
See Troubleshooting for more information.