User’s Guide
Table Of Contents
- Safety Instructions
- About Your Monitor
- Setting Up the Monitor
- Setting Up the Stand
- Operating the Monitor Webcam
- Organizing Your Cables
- Securing Your Monitor Using Kensington Lock (optional)
- Connecting Your Monitor
- Using the Tilt, Swivel, and Vertical Extension
- Rotating the Monitor
- Adjusting the Rotation Display Settings of Your System
- Removing the Monitor Stand
- VESA Wall Mounting (optional)
- Operating the Monitor
- Troubleshooting
- Appendix
64 │ Operating the Monitor
This means that the monitor cannot synchronize with the signal that it is
receiving from the computer. See Monitor Specifications for the Horizontal
and Vertical frequency ranges addressable by this monitor. Recommended
mode is 1920 x 1080.
NOTE: The message may be slightly different according to the
connected input signal.
You will see the following message before the DDC
/CI function is disabled:
When you adjust the Brightness level for the first time, the following message
appears:
NOTE: If Yes is selected, the message will not appear next time you
intend to change the Brightness setting.
When you change the default setting of po
wer saving features for the first time,
such as USB, the following message appears: