User’s Guide
Table Of Contents
- Safety Instructions
- About Your Monitor
- Setting Up the Monitor
- Setting Up the Stand
- Operating the Monitor Webcam
- Organizing Your Cables
- Securing Your Monitor Using Kensington Lock (optional)
- Connecting Your Monitor
- Using the Tilt, Swivel, and Vertical Extension
- Rotating the Monitor
- Adjusting the Rotation Display Settings of Your System
- Removing the Monitor Stand
- VESA Wall Mounting (optional)
- Operating the Monitor
- Troubleshooting
- Appendix
About Your Monitor │ 27
USB Downstream Connector
Pin Number
1 VCC
2 D-
3 D+
4 GND
5 SSRX-
6 SSRX+
7 GND
8 SSTX-
9 SSTX+
USB Ports
• 1 USB Type-B (USB 3.2 Gen1) upstream port - bottom
• 4 SuperSpeed USB 5 Gbps (USB 3.2 Gen1) Type-A downstream ports-
2 at bottom, 2 at rear
Power Charging Port - the ports with
battery icon supports fast current
charging capability if the device is BC 1.2 compatible.
NOTE: SuperSpeed USB 5 Gbps (USB 3.2 Gen1) functionality requires a
SuperSpeed USB 5 Gbps (USB 3.2 Gen1)-capable computer.
NOTE: The USB ports on the monitor work only when the monitor is
turned On or in Standby Mode. If you turn Off the monitor and then
turn it On, the attached peripherals may take a few seconds to resume
normal functionality.
6 SSTX+
7 GND
8 SSRX-
9 SSRX+
9-pin Side of the Connector