User’s Guide
Table Of Contents
- Safety Instructions
- About Your Monitor
- Setting Up the Monitor
- Setting Up the Stand
- Operating the Monitor Webcam
- Organizing Your Cables
- Securing Your Monitor Using Kensington Lock (optional)
- Connecting Your Monitor
- Using the Tilt, Swivel, and Vertical Extension
- Rotating the Monitor
- Adjusting the Rotation Display Settings of Your System
- Removing the Monitor Stand
- VESA Wall Mounting (optional)
- Operating the Monitor
- Troubleshooting
- Appendix
52 │ Operating the Monitor
Contrast Adjusts the Brightness first, and then adjust the
Contrast only if further adjustment is necessary.
Toggle the joystick up t
o increase the contrast and
toggle the joystick down to decrease the contrast
(Range: 0 - 100).
The Co
ntrast function adjusts the degree of
difference between darkness and lightness on the
monitor screen.
Input Source Selects between the different video signals that may
be connected to your monitor.
DP Select the DP input when you are using the
DisplayPort (DP) connector. Press the joystick to
confirm the selection.
HDMI Select the HDM
I input when you are using the HDMI
connector. Press the joystick to confirm the
selection.
Auto Select Allows you to scan for available input sources. The
default is On.
Rename Inputs Allows you to select the input name for the selected
i
nput source. The options are PC, PC 1, PC 2,
Laptop, Laptop 1, and Laptop 2.
NOTE: Input nam
es in warning messages and Display
Info will not be changed.