User’s Guide
Table Of Contents
- Safety Instructions
- About Your Monitor
- Setting Up the Monitor
- Setting Up the Stand
- Operating the Monitor Webcam
- Organizing Your Cables
- Securing Your Monitor Using Kensington Lock (optional)
- Connecting Your Monitor
- Using the Tilt, Swivel, and Vertical Extension
- Rotating the Monitor
- Adjusting the Rotation Display Settings of Your System
- Removing the Monitor Stand
- VESA Wall Mounting (optional)
- Operating the Monitor
- Troubleshooting
- Appendix
56 │ Operating the Monitor
MST DP Multi Stream Transport, select On to enable MST
(DP Out), select Off to disable the MST function.
See Connecting the Monitor for DP Multi-Stream
Transport (MST) Function for details.
NOTE: Wh
en DP upstream cable and DP
downstream cable are connected, the OSD will set
MST to On automatically. This action will only be
done once after Factory Reset or Display Reset.
Reset Display Press the joystick to reset all settings under the
Disp
lay menu to the factory preset values.
Audio &
Webcam
Allows you to adjust audio and webcam settings.
NOTE: For Webcam and Microphone to work,
connect the USB upstream cable from the PC to the
monitor.
Volume Allows you to increase the speaker volume.
Move the joystick up and down to adjust the volume
fr
om ‘0’ to ‘100’.
Speaker Select to Mut
e or Unmute the Speaker.
Microphone Select to Mut
e or Unmute the Microphone.
Webcam Select to Enab
le or Disable the Webcam.
Audio Profiles Allows you to choose from a list of preset audio
pr
ofiles.
Standard: De
fault audio setting.