Users Guide
Table Of Contents
- Safety instructions
- About your display
- Setting up the display
- Operating the display
- Troubleshooting
- Appendix
32 | Setting up the display
Wall mounting
(Screw dimension: M8 x 35 mm).
Refer to installation instruction that comes with the 3rd party wall mount that customer
purchases. Vesa-compatible base mounting kit (400 x 400) mm.
1. Install Wall Plate to Wall.
2. Place the display panel on a soft cloth or cushion on a stable at table.
3. Attach the mounting brackets from the wall mounting kit to the display.
4. Install Display to Wall Plate.
5. Ensure display is mounted vertically with no tilt forward or backward and a leveler
is used to assist to mount the display.
NOTE:
• Do not attempt to wall mount the Touch Display by yourself. It should be
installed by qualified installers.
• Recommended Wall Mount for this Display can be found in the Dell
support website at dell.com/support.
NOTE: For use only with UL or CSA or GS-listed wall mount bracket with
minimum weight/load bearing capacity of the product.