Installation manual

System Specifications | 59

System Specifications

This appendix contains the following major sections:

• Physical Design

• System Power Specifications on page 62

• Component Power Requirements on page 62

• Agency Compliance on page 63

Physical Design

NOTE: See

Figure B-1

and

Figure B-2 on page 61

for the data used for the physical dimensions.

Table B-1. Chassis Dimensions

Parameter Specifications

Height 15.7 inches (39.88 cm)

Width 17.5 inches (44.45 cm)

Depth 15.3 inches (38.86 cm)

Weight 38 lbs (17.24 kg) with factory installed components

86.63 lbs (39.29 kg) fully loaded

Mounting Integral rack mount strips for front mounting in a standard 19-inch rack.

Clearance required Front: 18 inches (46 cm)

Rear: 18 inches (46 cm)