Personal Computer User Manual

Installing System Components 169
Figure 3-27. Removing and Installing the Infiniband Mezzanine Card
Installing the Infiniband Mezzanine Card
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Align the Infiniband mezzanine card with the screw holes on the bracket.
See Figure 3-27.
2 Replace the three screws securing the Infiniband mezzanine card to the
bracket. See Figure 3-27.
3 Install the mezzanine card bridge board into the mezzanine slot on the
Infiniband mezzanine card. See Figure 3-26.
4 Replace the screw securing the mezzanine card bridge board to the
bracket. See Figure 3-26.
1 Infiniband mezzanine card 2 M3 screws (3)
3 mezzanine card bridge board connector 4 QSFP cage 1
5 QSFP cage 2
2
1
3
4
5