Personal Computer User Manual

About Your System 25
8016h SATA 4 Device
Not Found
Pause SATA 4 device
not found
Check if the SATA port 4 is
enabled. See "SATA
Configuration" on page 68.
Install a SATA device to SATA
port 4.
If the problem persists, see
"Getting Help" on page 229.
8017h SATA 5 Device
Not Found
Pause SATA 5 device
not found
Check if the SATA port 5 is
enabled. See "SATA
Configuration" on page 68.
Install a SATA device to SATA
port 5.
If the problem persists, see
"Getting Help" on page 229.
8018h Sparing Mode is
not be
Configured!!,
Please check
Memory
Configuration!!
Pause Memory
Sparing Mode
Failed
Check if the memory
configuration is set to Sparing
mode. See "Memory
Configuration" on page 66.
If the problem persists, see
"Getting Help" on page 229.
8019h Mirror Mode is
not be
Configured!!,
Please check
Memory
Configuration!!
Pause Memory Mirror
Mode Failed
Check if the memory
configuration is set to Sparing
mode. See "Memory
Configuration" on page 66.
If the problem persists, see
"Getting Help" on page 229.
8020h Supervisor and
User Passwords
have been
cleared
Pause Supervisor and
User Passwords
have been
cleared
Reset password. See "System
Board Jumper Settings" on
page 214 for more
information.
If the problem persists, see
"Getting Help" on page 229.
Error
Code
Error Message Response Error Cause Corrective Actions