Administrator Guide

5. Use an equipment lift or two people to lift the empty chassis without blanks (item 1 in Figure 4) and
align the rack-mount screw holes on each flange of the chassis with the holes in the equipment rack.
Rest the chassis on top of the rack bar (or rack tray, if installed).
Slide the chassis so that the holes in the side flanges align with the holes in the rack posts. Tighten
four rack screws (item 2 in Figure 4) on each chassis flange to attach the chassis to the rack posts.
Tighten each group of rack screws by starting with the bottom screw and working up.
Figure 4. Mounting the Chassis into a 2-Post Rack
Installing the Hardware
11