Users Guide

2. Configure peer-domain-link port-channel <vlt portchannel ID> in VLT Domain Proxy
Gateway LLDP mode. The VLT port channel is the one that connects the remote VLT domain.
Sample Configurations for Static VLT Proxy Gateway
Apply the following configurations in the Core L3 Routers C and D in local VLT domain and C1 and D1 in
the remote VLT domain:
1. Configure proxy-gateway static in VLT Domain CONFIG mode
2. Configure remote-mac-address <mac-address> in VLT Domain Proxy Gateway LLDP mode.
Configure the system mac-addresses of both C and D in C1 and also in D1 in the remote VLT
domain and vice versa.
VLT Proxy Gateway
1047