Users Guide

Sample Scenario for VLT Proxy Gateway
Figure 135. VLT Proxy Gateway — Topology 2
1. The above figure (Topology 2) shows a sample VLT Proxy gateway scenario. There are no diagonal
links in the square VLT connection between the C and D in VLT domain 1 and C1 and D1 in the VLT
domain 2. This undergoes sub-optimal routing with the VLT Proxy Gateway LLDP method. For VLT
Proxy Gateway to work in this scenario you must configure the , VLT-peer-mac transmit
command under VLT Domain Proxy Gateway LLDP mode, in both C and D (VLT domain 1) and C1
and D1 (VLT domain 2). This behavior is applicable only in the LLDP configuration and not required in
the static configuration. Sample Configuration
Dell(conf-vlt-domain)#proxy-gateway lldp
Dell(conf-vlt-domain-pxy-gw-lldp)#vlt-peer-mac transmit
1048
VLT Proxy Gateway