Users Guide

virtual-address 10.10.10.3
virtual-address 10.10.10.10
Dell#show track
Track 2
IPv6 route 2040::/64 metric threshold
Metric threshold is Up (STATIC/0/0)
5 changes, last change 00:02:16
Metric threshold down 255 up 254
First-hop interface is GigabitEthernet 1/3
Tracked by:
VRRP GigabitEthernet 1/8 IPv6 VRID 1
Track 3
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:16
First-hop interface is GigabitEthernet 1/3
Tracked by:
VRRP GigabitEthernet 1/8 IPv6 VRID 1
The following example shows verifying the VRRP status.
ON the MASTER
==========
Dell#show vrrp
------------------
TenGigabitEthernet 0/1, IPv4 VRID: 1, Version: 2, Net: 1.1.1.1
VRF: 0 default
State: Master, Priority: 100, Master: 1.1.1.1 (local)
Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec
Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 36, Gratuitous ARP sent: 1
Virtual MAC address:
00:00:5e:00:01:01
Virtual IP address:
1.1.1.100
Authentication: (none)
Dell#
ON the STANDBY
===========
Dell#show vrrp
------------------
TenGigabitEthernet 0/1, IPv4 VRID: 1, Version: 2, Net: 1.1.1.2
VRF: 0 default
State: Backup, Priority: 100, Master: 1.1.1.1
Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec
Adv rcvd: 65, Bad pkts rcvd: 0, Adv sent: 0, Gratuitous ARP sent: 0
Virtual MAC address:
00:00:5e:00:01:01
Virtual IP address:
1.1.1.100
Authentication: (none)
Dell#
Tracking states for 2 resource Ids:
2 - Up IPv6 route, 2040::/64, priority-cost 20, 00:02:11
3 - Up IPv6 route, 2050::/64, priority-cost 30, 00:02:11
The following example shows verifying the VRRP configuration on an interface.
Dell#show running-config interface tengigabitethernet 1/8/1
interface TenGigabitEthernet 1/8/1
1126
Virtual Router Redundancy Protocol (VRRP)