Users Guide

• show hardware layer3 qos linecard {0-2} port—set {0-3}
• show hardware ipv6 {e.g.-acl |in-acl} linecard {0-2} port—set {0-3}
• show hardware system-flow layer2 linecard {0-2} port—set {0-3} [counters]
• clear hardware linecard {0-2} counters
• clear hardware linecard {0-2} unit {0-3} counters
• clear hardware linecard {0-2} cpu data-plane statistics
• clear hardware party-bus port {{0-7} | all} statistics
• clear hardware cp cpu {data-plane | i2c | sata-interface} statistics
• clear hardware rp cpu {data-plane | i2c | sata-interface} statistics
• clear hardware sfm sfm-unit-num counters
• clear hardware cp-switch counters
Displaying Drop Counters
To display drop counters, use the show hardware linecard drops commands.
• Identify the line card, port pipe, and port that is experiencing internal drops.
show hardware linecard {0–2} drops [unit {0–3} [port {1–104}]]
• Display drop counters.
show hardware linecard {0–2} drops unit {0–3}
Dell#show hardware linecard 2 drops
UNIT No: 0
Total Ingress Drops : 41694
Total IngMac Drops : 0
Total Mmu Drops : 0
Total EgMac Drops : 0
Total Egress Drops : 0
Dell#show hardware linecard 2 drops unit 0
UserPort PortNumber Ingress Drops IngMac Drops Total Mmu Drops EgMac Drops
Egress Drops
0 1 0 0 0 0
0
4 5 0 0 0 0
0
8 9 0 0 0 0
0
12 13 41745 0 0 0
0
16 17 0 0 0 0
0
17 18 0 0 0 0
0
18 19 0 0 0 0 0
19 20 0 0 0 0
0
20 21 0 0 0 0
0
21 22 0 0 0 0
0
22 23 0 0 0 0
0
Debugging and Diagnostics
361