Users Guide

CLI Command Mode Prompt Access Command
• From every mode except
EXEC and EXEC Privilege,
enter the exit command.
NOTE: Access all the
following modes from
CONFIGURATION mode.
DOT1X PROFILE
dell(conf-dot1x-profile)#
dot1x
AS-PATH ACL
Dell(config-as-path)# ip as-path access-list
10 Gigabit Ethernet Interface
Dell(conf-if-te-0/0)#
interface (INTERFACE modes)
40 Gigabit Ethernet Interface
Dell(conf-if-fo-0/0)#
interface (INTERFACE modes)
Interface Range
Dell(conf-if-range)#
interface (INTERFACE modes)
Loopback Interface
Dell(conf-if-lo-0)#
interface (INTERFACE modes)
Management Ethernet Interface
Dell(conf-if-ma-0/0)#
interface (INTERFACE modes)
Null Interface
Dell(conf-if-nu-0)#
interface (INTERFACE modes)
PE 1-Gigabit Ethernet interface
(on a port extender)
Dell(conf-if-pegi-0/0/0)#
interface (INTERFACE modes)
Port-channel Interface
Dell(conf-if-po-0)#
interface (INTERFACE modes)
Tunnel Interface
Dell(conf-if-tu-0)#
interface (INTERFACE modes)
VLAN Interface
Dell(conf-if-vl-0)#
interface (INTERFACE modes)
STANDARD ACCESS-LIST
Dell(config-std-nacl)#
ip access-list standard (IP
ACCESS-LIST Modes)
EXTENDED ACCESS-LIST
Dell(config-ext-nacl)#
ip access-list extended (IP
ACCESS-LIST Modes)
IP COMMUNITY-LIST
Dell(config-community-
list)#
ip community-list
CONSOLE
Dell(config-line-
console)#
line (LINE Modes)
VIRTUAL TERMINAL
Dell(config-line-vty)#
line (LINE Modes)
STANDARD ACCESS-LIST
Dell(config-std-macl)# mac access-list standard
(MAC ACCESS-LIST Modes)
EXTENDED ACCESS-LIST
Dell(config-ext-macl)# mac access-list extended
(MAC ACCESS-LIST Modes)
MULTIPLE SPANNING TREE
Dell(config-mstp)# protocol spanning-tree
mstp
Per-VLAN SPANNING TREE Plus
Dell(config-pvst)# protocol spanning-tree
pvst
40
Configuration Fundamentals