Users Guide

RPM Online Insertion
Dell Networking systems can function with only one RPM. If you insert a second RPM, it comes online as
the standby RPM. To display the status of installed RPMs, enter the show rpm all command.
Dell# show rpm all
-- Route Processor Modules --
Slot Status NxtBoot Version
------------------------------------------
0 active online 1-0(0-4095)
1 standby online 1-0(0-4095)
Line Card Online Insertion
When you insert a line card into an online chassis, the Dell Networking OS detects the line card type. The
system writes the line card type to the running configuration and maintains this information as a logical
configuration if you remove the card. To display the status of installed line cards, enter the show
linecard all command.
Dell# show linecard all
-- Linecard Info --
LinecardId Type Status ReqTyp CurTyp Version Ports
----------------------------------------------------------------------------
0 Linecard online C9000LC2410T C9000LC2410T 1-0(0-4095) 24
1 Linecard online C9000LC2410G C9000LC2410G 1-0(0-4095) 24
2 Linecard online C9000LC2410T C9000LC2410T 1-0(0-4095) 24
3 Linecard online C9000LC2410T C9000LC2410T 1-0(0-4095) 24
4 Linecard online C9000LC0640 C9000LC0640 1-0(0-4095) 24
5 Linecard online C9000LC0640 C9000LC0640 1-0(0-4095) 24
6 Linecard online C9000LC0640 C9000LC0640 1-0(0-4095) 24
7 Linecard online C9000LC0640 C9000LC0640 1-0(0-4095) 24
8 Linecard online C9000LC2410G C9000LC2410G
1-0(0-4095) 24
9 Linecard online C9000LC2410G C9000LC2410G
1-0(0-4095) 24
10 Linecard online C9000-RPM-2.56T C9000-RPM-2.56T
1-0(0-4095) 4
11 Linecard online C9000-RPM-2.56T C9000-RPM-2.56T
1-0(0-4095) 4
Pre-configuring a Slot for a Line-Card Type
You can pre-configure an empty line-card slot with a logical line card by using the linecard slot-id
provision card-type command. After you create the logical line card, you can configure interfaces
on the line card as if it is present in the chassis. If the card fails, the system maintains the logical
configuration for the slot.
The C9010 supports the following line cards and card types:
• 6-Port 40 Gigabit Ethernet QSFP+ (card type: C9000LC0640)
• 24-Port 1/10 Gigabit Ethernet SFP+ (card type: C9000LC2410G)
• 24-Port 1/10 Gigabit Ethernet Base-T RJ-45 (card type: C9000LC2410T)
Dell(conf)# linecard 3 provision C9000LC2410G
Dell(conf)# end
Dell# show linecard 3
High Availability (HA)
439