Users Guide

Dell(conf-track-101)#description NYC metro
Dell(conf-track-101)#end
Dell#show track 101
Track 101
Interface TenGigabitEthernet 7/2/1 ip routing
Description: NYC metro
Example of configuring object tracking for an IPv6 interface.
Dell(conf)#track 103 interface tengigabitethernet 7/11/1 ipv6
routing
Dell(conf-track-103)#description Austin access point
Dell(conf-track-103)#end
Dell#show track 103
Track 103
Interface TenGigabitEthernet 7/11/1 ipv6 routing
Description: Austin access point
Displaying Tracked Objects
To display the currently configured objects used to track Layer 2 and Layer 3 interfaces, and IPv4 and
IPv6 routes, use the following
show commands.
To display the configuration and status of currently tracked Layer 2 or Layer 3 interfaces, IPv4 or IPv6
routes, or a VRF instance, use the show track command. You can also display the currently configured
per-protocol resolution values used to scale route metrics when tracking metric thresholds.
• Display the configuration and status of currently tracked Layer 2 or Layer 3 interfaces, IPv4 or IPv6
routes, and a VRF instance.
show track [object-id [brief] | interface [brief] [vrf vrf-name] | ip route
[brief] [vrf vrf-name] | resolution | vrf vrf-name [brief] | brief]
• Display the tracking configuration of a specified object or all objects that are currently configured on
the router.
show running-config track [object-id]
Example of the show track command.
Dell#show track
Track 1
IP route 23.0.0.0/8 reachability
Reachability is Down (route not in route table)
2 changes, last change 00:16:08
Tracked by:
Track 2
IPv6 route 2040::/64 metric threshold
Metric threshold is Up (STATIC/0/0)
5 changes, last change 00:02:16
Metric threshold down 255 up 254
First-hop interface is GigabitEthernet 13/2
Tracked by:
VRRP GigabitEthernet 7/30 IPv6 VRID 1
Track 3
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:16
First-hop interface is GigabitEthernet 13/2
692
Object Tracking