Users Guide
Examples of Removing a PE Stack Member
The following example shows the status of stack-unit 1 before it is removed from the PE stack.
Dell#show pe 0 system brief
Stack MAC : 00:01:e8:8a:df:e6
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
-----------------------------------------------------------
0 Management online C1048P C1048P 1-0(0-4149) 52
1
Member online C1048P C1048P 1-0(0-4149) 52
2 Member not present
3 Standby online C1048P C1048P 1-0(0-4149) 52
4 Member not present
5 Member not present
6 Member not present
7 Member not present
The following example displays the status of stack-unit 1 after it is removed from the PE stack.
Dell#show pe 0system brief
Stack MAC : 00:01:e8:8a:df:e6
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
-------------------------------------------------------
0 Management online C1048P C1048P 1-0(0-4149) 52
1
Member not present
2 Member not present
3 Standby online C1048P C1048P 1-0(0-4149) 52
4 Member not present
5 Member not present
6 Member not present
7 Member not present
Verifying a PE Stack Master and Standby
The Status LED on the front panel of a PE stack unit identifies the unit’s role in the stack.
• Off indicates that the unit is a stack member.
• Off also indicates that the unit is stack standby.
• Solid green indicates that the unit is the stack master (management unit).
Displaying PE Stack Information
To display information about a PE stack configuration, enter the following show commands in EXEC
Privilege mode.
• Display information about PE stack units connected to the C9010, including the discovery status.
show pe
Dell# show pe
Maximum number of PE Units allowed: 40
Current number of PE units in the system: 8
Codes: A - Active, I - Inactive
Reason: CTM - Card Type Mismatch, CAM - CAM ACL Mismatch
SVM - Software Version Mismatch, UE - Unknown Error
Port Extender (PE) Stacking
789