Administrator Guide
R2# show ip bgp neighbors 2.2.2.3
BGP neighbor is 2.2.2.3, remote AS 1, external link
Member of peer-group pg1 for session parameters
BGP version 4, remote router ID 12.0.0.4
BGP state ESTABLISHED, in this state for 00:05:33
...
Neighbor is using BGP neighbor mode BFD configuration
Peer active in peer-group outbound optimization
...
R2# show ip bgp neighbors 2.2.2.4
BGP neighbor is 2.2.2.4, remote AS 1, external link
Member of peer-group pg1 for session parameters
BGP version 4, remote router ID 12.0.0.4
BGP state ESTABLISHED, in this state for 00:05:33
...
Neighbor is using BGP peer-group mode BFD configuration
Peer active in peer-group outbound optimization
...
Congure BFD for VRRP
When using BFD with VRRP, the VRRP protocol registers with the BFD manager. BFD sessions are established with all neighboring
interfaces participating in VRRP. If a neighboring interface fails, the BFD agent on the line card noties the BFD manager, which in turn
noties the VRRP protocol that a link state change occurred.
Conguring BFD for VRRP is a three-step process:
1 Enable BFD globally.
2 Establish VRRP BFD sessions with all VRRP-participating neighbors.
3 On the master router, establish a VRRP BFD sessions with the backup routers. Refer to Establishing Sessions with All VRRP
Neighbors.
Related Conguration Tasks
• Changing VRRP Session Parameters.
• Establishing Sessions with OSPF Neighbors.
Bidirectional Forwarding Detection (BFD)
171