Administrator Guide

show hardware linecard {0–2} drops unit {0–3}
Dell#show hardware linecard 2 drops
UNIT No: 0
Total Ingress Drops : 41694
Total IngMac Drops : 0
Total Mmu Drops : 0
Total EgMac Drops : 0
Total Egress Drops : 0
Dell#show hardware linecard 2 drops unit 0
UserPort PortNumber Ingress Drops IngMac Drops Total Mmu Drops EgMac Drops Egress Drops
0 1 0 0 0 0 0
4 5 0 0 0 0 0
8 9 0 0 0 0 0
12 13 41745 0 0 0 0
16 17 0 0 0 0 0
17 18 0 0 0 0 0
18 19 0 0 0 0 0
19 20 0 0 0 0 0
20 21 0 0 0 0 0
21 22 0 0 0 0 0
22 23 0 0 0 0 0
23 24 0 0 0 0 0
24 25 0 0 0 0 0
28 29 0 0 0 0 0
32 33 0 0 0 0 0
36 37 0 0 0 0 0
40 41 0 0 0 0 0
44 45 0 0 0 0 0
Internal 50 0 0 0 0 0
Internal 51 0 0 0 0 0
Internal 52 0 0 0 0 0
Internal 53 0 0 0 0 0
Internal 54 0 0 0 0 0
Internal 55 0 0 0 0 0
Internal 56 0 0 0 0 0
Internal 57 0 0 0 0 0
Internal 58 0 0 0 0 0
Internal 59 0 0 0 0 0
Internal 60 0 0 0 0 0
Internal 61 0 0 0 0 0
Displaying Dataplane Statistics
The show hardware linecard {0–2} cpu data-plane statistics command provides information about the packet types
entering a line-card CPU.
As shown in the following example, the show hardware linecard cpu data-plane statistics command output provides
detailed RX/TX packet statistics on a per-queue basis. The output allows you to verify if CPU-bound trac is internal (so-called party bus
or IPC trac) or network control trac, which the CPU must process.
To display input and output statistics on the party bus, which carries inter-process communication trac between CPUs use the show
hardware party-bus port {{0-7}|all} statistics command.
Dell#show hardware linecard 2 cpu data-plane statistics
HANSKVILLE Mib Counters:
TR 64 byte frames = 3
TR 127 byte frames = 358
TR 255 byte frames = 1363
TR 511 byte frames = 1934
TR 1023 byte frames = 18
TR MAX Byte frames = 6202
336
Debugging and Diagnostics