Administrator Guide
PeGi 255/3/7 Up 1000 Mbit Full --
PeGi 255/3/8 Up 1000 Mbit Full --
PeGi 255/3/9 Up 1000 Mbit Full --
PeGi 255/3/10 Up 1000 Mbit Full --
PeGi 255/3/11 Up 1000 Mbit Full --
PeGi 255/3/12 Up 1000 Mbit Full --
PeGi 255/3/13 Up 1000 Mbit Full --
PeGi 255/3/14 Up 1000 Mbit Full --
PeGi 255/3/15 Up 1000 Mbit Full --
PeGi 255/3/16 Up 1000 Mbit Full --
PeGi 255/3/17 Up 1000 Mbit Full --
PeGi 255/3/18 Up 1000 Mbit Full --
PeGi 255/3/19 Up 1000 Mbit Full --
PeGi 255/3/20 Up 1000 Mbit Full --
PeGi 255/3/21 Up 1000 Mbit Full --
PeGi 255/3/22 Up 1000 Mbit Full --
PeGi 255/3/23 Up 1000 Mbit Full --
PeGi 255/3/24 Up 1000 Mbit Full --
PeGi 255/3/25 Up 1000 Mbit Full --
PeGi 255/3/26 Up 1000 Mbit Full --
PeGi 255/3/27 Up 1000 Mbit Full --
PeGi 255/3/28 Up 1000 Mbit Full --
PeGi 255/3/29 Up 1000 Mbit Full --
PeGi 255/3/30 Up 1000 Mbit Full --
PeGi 255/3/31 Up 1000 Mbit Full --
PeGi 255/3/32 Up 1000 Mbit Full --
PeGi 255/3/33 Up 1000 Mbit Full --
PeGi 255/3/34 Up 1000 Mbit Full --
PeGi 255/3/35 Up 1000 Mbit Full --
PeGi 255/3/36 Up 1000 Mbit Full --
PeGi 255/3/37 Up 1000 Mbit Full --
PeGi 255/3/38 Up 1000 Mbit Full --
PeGi 255/3/39 Down Auto Auto --
PeGi 255/3/40 Up 1000 Mbit Full --
PeGi 255/3/41 Down Auto Auto --
PeGi 255/3/42 Down Auto Auto --
PeGi 255/3/43 Up 1000 Mbit Full --
PeGi 255/3/44 Up 1000 Mbit Full --
PeGi 255/3/45 Up 1000 Mbit Full --
PeGi 255/3/46 Down Auto Auto --
PeGi 255/3/47 Up 10
PeGi 255/3/48 Up 10
To view which interfaces are enabled for Layer 3 data transmission, use the show ip interfaces brief command in EXEC Privilege
mode. In the following example, TengigabitEthernet interface 1/5 is in Layer 3 mode because an IP address has been assigned to it and the
interface’s status is operationally up.
Dell#show ip interface brief
Interface IP-Address OK? Method Status Protocol
TengigabitEthernet 1/0 unassigned NO Manual administratively down down
TengigabitEthernet 1/1 unassigned NO Manual administratively down down
TengigabitEthernet 1/2 unassigned YES Manual up up
TengigabitEthernet 1/3 unassigned YES Manual up up
TengigabitEthernet 1/4 unassigned YES Manual up up
TengigabitEthernet 1/5 10.10.10.1 YES Manual up up
TengigabitEthernet 1/6 unassigned NO Manual administratively down down
TengigabitEthernet 1/7 unassigned NO Manual administratively down down
TengigabitEthernet 1/8 unassigned NO Manual administratively down down
To view only congured interfaces, use the show interfaces configured command in the EXEC Privilege mode.
To determine which physical interfaces are available, use the show running-config command in EXEC mode. This command displays
all physical interfaces available on the line cards.
Dell#show running
Current Configuration ...
!
interface TengigabitEthernet 9/6
Interfaces
435