Administrator Guide

Use the keyword router to set the device role as router.
5 Set the hop count limit.
POLICY LIST CONFIGURATION mode
hop-limit {maximum | minimum limit}
The hop limit range is from 0 to 254.
6 Set the managed address conguration ag.
POLICY LIST CONFIGURATION mode
managed-config-flag {on | off}
7 Enable verication of the sender IPv6 address in inspected messages from the authorized device source access list.
POLICY LIST CONFIGURATION mode
match ra{ipv6-access-list name | ipv6-prefix-list name | mac-access-list name}
8 Enable verication of the advertised other conguration parameter.
POLICY LIST CONFIGURATION mode
other-config-flag {on | off}
9 Enable verication of the advertised default router preference value. The preference value must be less than or equal to the specied
limit.
POLICY LIST CONFIGURATION mode
router-preference maximum {high | low | medium}
10 Set the router lifetime.
POLICY LIST CONFIGURATION mode
router—lifetime value
The router lifetime range is from 0 to 9,000 seconds.
11 Apply the policy to trusted ports.
POLICY LIST CONFIGURATION mode
trusted-port
12 Set the maximum transmission unit (MTU) value.
POLICY LIST CONFIGURATION mode
mtu value
13 Set the advertised reachability time.
POLICY LIST CONFIGURATION mode
reachable—time value
The reachability time range is from 0 to 3,600,000 milliseconds.
14 Set the advertised retransmission time.
POLICY LIST CONFIGURATION mode
retrans—timer value
The retransmission time range is from 100 to 4,294,967,295 milliseconds.
15 Display the congurations applied on the RA guard policy mode.
POLICY LIST CONFIGURATION mode
506
IPv6 Routing