Administrator Guide

NOTE: When you load the startup conguration or a conguration le from a network server such as TFTP to the running
conguration, the conguration is added to the running conguration. This does not replace the existing running conguration.
Commands in the conguration le has precedence over commands in the running conguration.
Congure the Overload Bit for a Startup Scenario
For information about setting the router overload bit for a specic period of time after a switch reload is implemented, refer to the
Intermediate System to Intermediate System (IS-IS) section in the Dell Networking OS Command Line Reference Guide.
Viewing Files
You can only view le information and content on local le systems.
To view a list of les or the contents of a le, use the following commands.
View a list of les on the internal ash.
EXEC Privilege mode
dir flash:
View the contents of a le in the internal ash.
EXEC Privilege mode
show file flash://filename
View a list of les on an external ash.
EXEC Privilege mode
dir usbflash:
View the running-conguration.
EXEC Privilege mode
show running-config
View the startup-conguration.
EXEC Privilege mode
show startup-config
Example of the dir Command
The output of the dir command also shows the read/write privileges, size (in bytes), and date of modication for each le.
Dell# dir
Directory of flash:
1 drwx 4096 Jan 01 1980 00:00:00 +00:00 .
2 drwx 2380 Sep 30 2015 16:59:51 +00:00 ..
3 drwx 4096 May 20 2015 10:45:42 +00:00 TRACE_LOG_DIR
4 drwx 4096 May 20 2015 10:45:42 +00:00 CONFD_LOG_DIR
5 drwx 12288 May 20 2015 10:45:42 +00:00 CRASH_LOG_DIR
6 drwx 28672 May 20 2015 10:45:42 +00:00 CORE_DUMP_DIR
7 drwx 4096 May 20 2015 10:45:42 +00:00 DEFAULT_DIAG_REPORT_DIR
8 d--- 4096 May 20 2015 10:45:44 +00:00 ADMIN_DIR
9 drwx 4096 May 20 2015 10:45:44 +00:00 RUNTIME_PATCH_DIR
10 -rwx 23495 May 21 2015 10:53:00 +00:00 0521_6unit.cfg
11 -rwx 25350 May 20 2015 16:22:44 +00:00 0520_6unit.cfg
12 -rwx 33901 Jul 29 2015 01:48:08 +00:00 backup1
13 -rwx 32267 Aug 07 2015 14:45:26 +00:00 startup-config.bak
54
Getting Started