Administrator Guide
Create multicast boundaries and domains by ltering inbound and outbound bootstrap router (BSR) messages per interface. The following
command is applied to the subsequent inbound and outbound updates. Timeout removes existing BSR advertisements.
• Create multicast boundaries and domains by ltering inbound and outbound BSR messages per interface.
ip pim bsr-border
• Remove candidate RP advertisements.
clear ip pim rp-mapping
Enabling PIM-SM Graceful Restart
To enable PIM-SM graceful restart, use the following commands.
• Enable PIM-SM graceful restart (non-stop forwarding capability).
CONFIGURATION mode
ip pim graceful-restart nsf
NOTE:
• When NSF capability is disabled by conguration, the congured values for restart-time and stale-entry-time are reset to
default values.
• The restart-time and stale-entry-time options can be congured only when NSF is enabled on the system.
• (option) restart-time: the time the Dell Networking system requires to restart. The default value is 120 seconds.
• (option) stale-entry-time: the maximum amount of time that the Dell Networking system preserves entries from a restarting
neighbor. The default value is 60 seconds. .
PIM Sparse-Mode (PIM-SM)
709